EVERY STEP OF THE CHILDREN’S PLAY FACILITIES SHOULD BE OPERATED AND INSPECTED IN ACCORDANCE WITH SAFETY PROCEDURES.

  Establish a rigorous maintenance system for the expansion of children's play facilities. Each device shall be protected by one or two persons, each of whom shall operate and inspect each link in accordance with the safety procedures and sign the names of the persons involved to implement the specific responsible person and in a practical manner. . In particular, development equipment for high-altitude children must be inspected before each use. The joints should be inspected regularly (protecting the cable ends and the cable stays at both ends of the ropes, all screw joints) and the problems should be replaced in a timely manner; a sound periodic inspection and registration system is required to ensure the safe use of the children's play facilities.

  Pay attention to cleaning the equipment. Contaminated equipment should be cleaned up in time. For example, training belts, ropes, helmets and steel wires should be cleaned up for future use. Again, you need to keep some of the necessary equipment, including lubricants, as well as alternatives to certain equipment. For special equipment with higher difficulty, it is necessary to ask professionals, children's play facilities development manufacturers to send professional and technical personnel for maintenance.

  1. Minimize the impact of harmful factors

  (1) Various types of corrosion entering the interior of the device, such as rainwater, chemicals in the air, etc., are reduced by external passages of equipment components, gaps, and the like.

  (2) Safety clothing, rainbow rope nets and other equipment are flammable, and fireworks are prohibited.

  2. Eliminate the effects of man-made damage

  (1) When using a power cord, an electrostatic cord, and an auxiliary rope, someone will step on the rope. If the rope is pressed, these prismatic hard objects or sand will enter the rope. After the rope is compressed, the interior will be worn and will result in safety.

  (2) The locking device should be operated gently during operation to avoid collision and throwing, because the locking device will change the impact force internally.

  (3) The helmet should be operated gently to avoid collision and damage.

  3. Children's play facilities exceed storage rules

  (1) The equipment must be deducted, the name, quantity, time, return and name of the person in charge.

  (2) When returning the equipment, check whether the inspection quantity is accurate. Regularly replace damaged and unsafe children's rides